Posted on: 10 August 2015
If you've decided to install a home theater system in your home, then you've made a wise decision. These offer excellent visual and audio effects while possibly raising the value of your home. Once you've chosen the best possible system, you now have to consider the electrical components of the installation. This is the behind-the-scenes part of your home theater, but it is one of the most critical. Without the most appropriate wiring, your system won't perform as best as it can or it could possibly become damaged. Here are a few things to consider:
Consider Pre-Wiring During the Building or Remodeling Phase of Your Home
In some cases, you may be able to pre-wire for your home theater system. This only works if you are currently building or remodeling your home, possibly adding an addition or renovating the basement where you plan to install the home theater system. This is a great time- and money-saver.
Make Sure You Have Plenty of Electrical Outlets
In a home theater, you are going to have speakers, TVs, DVD players, etc. All of these need somewhere to plug into. While you could get a power strip and use it, it is much safer to simply install additional electrical outlets throughout the space. You don't want to put too much strain on one outlet, which could eventually trip the breaker when you switch everything on.
Consider Dedicating a Circuit Breaker to Your System
When too many electrical components are turned on at any given time, the breaker could become tripped. This is particularly true if these devices are all on the same circuit. So, if your home theater system is on the same circuit breaker as the washer, dryer and dishwasher, you may run into problems with watching a movie when the washer and dryer are going. For that reason, you may want to consider installing a circuit breaker for the sole purpose of your home theater system to avoid any circuit issues.
Don't Forget to Guard It with a Surge Protector
You probably have a surge protector hooked up to your computer so that should a huge storm come in, your computer won't be damaged. The same should hold true for your home theater system. There are some surge protectors that are designed specifically for use with home theater systems, although any surge protector will do as long as it can hold up to the amount of electrical juice your system puts off. In the end, you just want to make sure your investment is protected.
Unless you're experienced in electrical work, you'll definitely want to consult with an electrical contractor and have him or her perform all the electrical work to ensure everything is hooked up properly and safely.Share